The carb adapter comes with a custom billet insert to improve air flow and horse power by concealing the mounting screws and funneling the airflow into the carb bore. The adapters offer improved hood clearance over other adaptors due to their slim design, and the carb is oriented parallel to the crankshaft for improved fuel distribution. The carb adapter is available for both 1.5" and 1.75" carb bores, and comes with two stainless steel Allen socket screws for mounting (carb studs are optional). Air Cleaners sold separately. Gaskets not included, however they can be purchased at any parts store.
Note: The kit comes with a Holley fuel pressure regulator, however a high quality Weber regulator is available (see options).
Note: You can use your stock fuel pump with a fuel pressure regulator, or an electric fuel pump (see options). If you use the AirTex Electric Fuel Pump, you do not need to use a fuel pressure regulator. A stainless steel Fuel Pump Block-off Plate is optional.
Note: In most cases you'll need to replace the stock distributor with an aftermarket distributor, such as the Duraspark II or the DUI. Please see the Classic Ilines tech articles on Ignition System Choices and Load-O-Matic Distributors for more information.
Note: Modifications to the carb linkage are required. Some guys modify their existing linkage, while others install a throttle cable. These can be purchased new from Lokar, or you can adapt a used pedal and cable from a bone yard donor car, such as a Maverick or Granada
Note: Now jetted for 6 cylinder engines. However, occasionally you'll need to rejet the carb to get the best performance. Please see the Classic Inlines tech article on Adjustments & Tuning for more information. See link in Tech Section.
NOTE: Failure to purge the gas line and/or installing a new fuel filter will void the warranty.
